Siemens PLC

Product Details:

Product Details:

SIMATIC S7-300, CPU 314C-2PN/DP Compact CPU with 192 KB work memory, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Integr. power supply 24 V DC, Front connector (2x 40-pole) and Micro Memory Card required

Product Details:

SIMATIC S7-200, CPU 226 COMPACT UNIT, DC POWER SUPPLY 24 DI DC/16 DO DC, 16/24 KB CODE/10 KB DATA, 2 PPI/FREEPORT PORTS 

Product Details:

The KL2022 digital output terminal connects the binary control signals from the automation unit on to the actuators at the process level with electrical isolation. It handles different load currents, and its outputs are protected against short-circuit. The Bus Terminal contains two channels that indicate their signal state by means of light emitting diodes.

Product Details:

The KL4032 analog output terminal generates signals in the range from -10 to 10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the Bus Terminal have a common ground potential. The run LEDs give an indication of the data exchange with the Bus Coupler.

Product Details:

AMSAMOTION USB-CNV3 for Fuji NB/NJ/NS/NW0 Series PLC Programming Cable.The USB-CNV3 fuji plc programming cable is specifically designed for use with the NB, NJ, NS, and NW0 series of Fuji PLCs. It allows you to establish a connection between your computer and the PLC in order to program, monitor, and transfer data. The cable facilitates communication and data exchange between the computer and the PLC, enabling you to configure and control the PLC's functions and parameters.

Product Details:

SITOR fuse link, with slotted blade contacts, NH2, In: 800 A, aR, Un AC: 800 V, front indicator 
Siemens 3Ne3 338-8 Fuse 800 Vac
Siemens
Sitor
3Ne3 338-8
Iec 269
Vde 0636
800 A
800 V A.C.
Made In Germany
Weight: 700 Gm

Product Details:

SIMATIC S7-200 CN, Digital I/O EM 223, only for S7-22X CPU, 16 DI 24 V DC, sink/source, 16 DO relay, 2 A/channel this S7-200 CN product only has CE approval

Product Details:

SM322, 16DO 24V DC, 0,5ASIMATIC S7-300, Digital output SM 322, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole, Total current 4 A/group (8 A/module)

Product Details:

Product Details:

Siemens - 6GK1503-2CB00 PROFIBUS OLM/G11 V4.0 OPTICAL LINK MODULE WITH 1 RS485 AND 1 GLASS FIBER-OPTIC CABLE INTERFACE (2 BFOC SOCKETS), WITH SIGNALING CONTACT AND TEST PORT

Product Details:

6es7134-4gb11-0ab0 simatic dp, electronics module  et200s  simatic dp, electronic module for et 200s, 2 ai stand. I-4dmu 15 mm wide, +/-20ma; 13 bit + sign,4 . . 20ma; 12 bit for 4-wire transducer cycle time 65 ms/channel with led sf (group fault)

Product Details:

• Mitsubishi PLC Controller module FX3UC-64MT/D
• Mitsubishi PLC FX3U Series
• We are First Class mitsubishi plc dealer and mitsubishi plc distributor in China.
• We can Supply mitsubishi electric automation parts,such as Mitsubishi PLC,Mitsubishi Servo Motor,Mitsubishi HMI,Mitsubishi VFD and So on,
• 100% Original and new,In stock by Mitsubishi PLC
• Delivery time: Ready in stock and 1 days for ship out

Product Details:

SINAMICS S120 DOUBLE MOTOR MODULE INPUT: DC 600V OUTPUT: 3AC 400V, 3A/3A FRAME SIZE: BOOKSIZE D-TYPE INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE AND SUPPORT OF THE EXTENDED SAFETY INTEGRATED FUNCTIONS INCL. DRIVE-CLIQ CABLE

Product Details:

Product Details:

The 2711P-RDT10C Panel View Plus and PanelView Plus CE 1000 Color Touch 10.4-inch. TFT Screen Display Module by Allen-Bradley is a high-quality display module. Our Bulletin 2711C PanelView Component Graphic Terminals are panel-mount display devices that provide operators with keypad or touch screen options for input. The 2711P-B15C22D9P has a weight of around 4.14kg and dimensions of approximately 329mm x 484mm x 69.6mm Additionally It is CE c-UL-us KCC and RoHS-certified. Get Best Price of Allen Bradley 2711P-RDT10C HMI.

Product Details:

Product Details:

The Omron GRT1-ID4-1 is a 4-point PNP digital input module belonging to the SmartSlice modular I/O system, designed for flexible, space-saving industrial automation configurations. It functions as an expansion unit that connects to a communication head (such as DeviceNet, PROFINET, or EtherCAT) to provide remote I/O capabilities for Omron CJ, CS, and NJ series controllers. Functional Overview

• Modular Expansion: Part of a "building-block" style system where up to 64 I/O units can be combined on a single station to match specific application needs.
• Smart Functions: Includes internal logic for monitoring operating status, counting ON/OFF operations, and tracking total operating time to facilitate preventive maintenance.
• Automatic Configuration: When paired with Omron master units, the module supports automatic I/O allocation and parameter restoration, allowing for "plug-and-work" setup without complex software configuration.

The Siemens 6GK5008-0BA10-1AB2 is an SCALANCE XB008 unmanaged industrial Ethernet switch with 8 RJ45 ports, a 10/100 Mbit/s speed, and 24 V DC power supply for small star and line topologies in industrial networks. It features LED diagnostics, an IP20 rating, and is designed for DIN rail or wall mounting.  

ET 200SP, IM155-6PN STSIMATIC ET 200SP, PROFINET interface module IM 155-6PN Standard, max. 32 I/O modules, and 16 ET 200AL modules, single hot swap, incl. server module (6ES7193-6PA00-0AA0)

Product Details:

Motor Drives Servo DRV 200V 1PH 100W ML2

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended  

Product Details:

These sensors have been specially designed for the recognition of color markings. Various color markings can be recognized on different backgrounds by selecting the type of transmitted light. 

Product Details:

A product or component with the code TS-4-4-120-PN could be a type of sensor or industrial control device from multiple different manufacturers, as the code is not standardized. The specific function and technical specifications will depend on the manufacturer. Potential products matching parts of the code include:

• Pressure switches (Argo-Hytos): The manufacturer Argo-Hytos produces sandwich-plate pressure switches with an ordering code starting with "TS4". "PN" could indicate "PNP" (Positive-Negative-Positive), a standard type of electrical output found in many industrial sensors.

Product Details:

G-Series servo drive, 1~ 200 VAC, MECHATROLINK II integrated, 750 W 
Motor Drives Servo DRV 200V PH 50W ML2 

Product Details:

BCC0318Single-ended cordsetsSensor cables unshielded. Typecode:

BCC M425-0000-1A-001-PX0334-050

Product Details:

The product number 6ES7153-1AA03-0XB0 corresponds to the SIMATIC DP, Interface module IM 153-1 for ET 200M from Siemens. This interface module connects a PROFIBUS DP fieldbus with the ET 200M distributed I/O system, allowing it to act as a PROFIBUS DP slave. 

Product Details:

I/O Controllers MODULE HI SPEED I/O COMPO BUS/S MASTER 

 Up to 256 I/O points per Master.

• Up to 32 Slaves per Master. 

• Communications cycle time: 0.5 ms (at 750 kbps). 

• Communications distance: Up to 500 m (at 93.75 kbps) 

Product Details:

MELSEC-F Series · PLC main unit · I/O extension · Analog control · High-speed counting · Positioning control · Network communication ..

Product Details:

Specialist Controllers 16 axis pos. Co ntrol Mod.
Decrease TCO with Simple Operation, Reduced Wiring, Batch Settings, and Batch Management

Product Details:

• Standard model CPU unit for applications requiring large memory capacity, such as Data Management
• I/O Capacity: 1280 points
• Program Capacity: 30 Ksteps
• Data Memory Capacity: 64 K words (DM: 32 K words, EM: 32 K words × 1 bank)
• Current consumption (A): 5 V= 0.91

 

Product Details:

Sensor cables unshieldedConnectionM12x1-Female, straight, 5-pin, A-codedCablePUR black, 5 m, drag chain compatibleNumber of conductors3Conductor cross-section0.34 mm²Cable temperature, fixed routing-50...90 °C

SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XI 2-/4-WIRE STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3%

Product Details:

Allen-Bradley 2713P-T10CD1 PanelView 5310,10 in. Wide Display, Touch screen,Color, 24V DC, Single Ethernet port 

Product Details:

The FECA-01 Adapter module is an optional device for ABB drives which enables the connection of the drive to an EtherCAT network.

The FECA-01 Adapter module is compatible with the: ACS530, ACS355, ACSM1, ACS380, ACH580, ACQ580, ACS580, ACS850,ACS880.
The adapter module is compatible with more VFDs that may not be listed here.

Product Details:

Product Details:

ConnectionM12x1-Female, angled, 5-pin, A-codedPower indicatorGreen LEDFunction indicator (Pin 4)LED yellowSwitching outputPNP normally open (NO)CablePUR black, 10 m, drag chain compatible