Electronic Components

Product Details:

• Two switching outputs, one of them with IO-Link communication interface
• Red/green display for clear identification of the acceptable range
• The process connection can be rotated for optimum alignment
• With long-term stability thanks to high overload protection
• Robust design for use in harsh industrial environments

Product Details:

Product Specification Product DescriptionOwing to the efforts of our dedicated team of professionals, we have been constantly engaged in offering the best quality Bussmann Fuse 200 AMP.

Product Details:

Additional Information:

• Packaging Details: Configuration 2-Pack Series V series (6th-Generation) VCES(V) Detail 1200 IC(A) Detail 200 Tvj max(℃) Detail 175 Tvjop max(℃) Detail 150 Tc(℃) Detail 125 Tstg(℃) Detail -40 to 125 Package M276 Size width (mm) 62 Size length (mm) 108 Net mass (Grams) 370

Product Details:

Airtac DMSG-020 cylinder position sensor features -

Airtac has discontinued their CS1 and DS1 position switches. Shop the new DMS and CMS series!
This switch is a compatible replacement for the Airtac DS1G020 position switch.

Compatible with the following air cylinder series:
ACP
ACQ/TACQ
SDA
TWQ
TCL/TCM
QCK
TWH/TWM
SAU
HFZ
HFY
HFP
MD/MK
TR
STW
HFK

Product Details:

Product Details:

L293D is a basic motor driver integrated chip (IC) that enables us to drive a DC motor in either direction and also control the speed of the motor. The L293D is a 16 pin IC, with 8 pins on each side, allowing us to control the motor. It means that we can use a single L293D to run up to two DC motors. L293D consist of two H-bridge circuit. H-bridge is the simplest circuit for changing polarity across the load connected to it.

There are 2 OUTPUT pins, 2 INPUT pins, and 1 ENABLE pin for driving each motor. It is designed to drive inductive loads such as solenoids, relays, DC motors, and bipolar stepper motors, as well as other high-current/high-voltage loads.

Product Details:

The CHL3S Power Adapter is a compact and efficient switching power supply designed to provide stable DC output for electronic devices. With an output voltage of 12.6V DC and a current capacity of 1.5A, it delivers up to 18.9W of power, making it suitable for medium-power applications. The adapter is equipped with a standard DC 5.5mm × 2.1mm barrel plug, ensuring compatibility with a wide range of consumer electronics, rechargeable devices, LED systems, communication equipment, and small appliances. Built with safety in mind, it includes over-voltage, over-current, and short-circuit protection, ensuring reliable performance and long service life.

Product Details:

MSA-0836-TR1G

RF Amplifier Amplifier Si RFIC

Category

RF Amplifier

Mfr Part #

MSA-0836-TR1G

Mfr

Broadcom

Life Cycle

Obsolete

HSN Code

85423100

Product Details:

Our company holds vast experience in this domain and is involved in offering Ir Sensor.

Find the best price for Ir Sensor.

Product Details:

This Resistor  680 Ohms has a resistance of 680 Ohm with a tolerance of ±5%, meaning its actual resistance can vary by up to 5% from the specified value. It can safely dissipate up to 1W of power. The package type is SMD 2512, indicating its surface-mount design and dimensions of approximately 6.35mm x 3.17mm.

Product Details:

Metallized plastic Hood provides excellent noise protection. ■ Connectors are available with cables connected horizontally (9-pin and 25-pin models only) to enable using the space behind the Connectors more effectively.

Product Details:

ECCN (US)EAR99Part StatusObsoleteHTS8542.39.00.01AutomotiveNoPPAPNoSwitch TypeSPDTSwitch ConfigurationSingle SPDTNumber of Switches1Frequency Band (MHz)0 to 3000Maximum Frequency (MHz)3000Minimum Isolation Voltage (dB)14Maximum Insertion Loss (dB)1.1Typical Input 1dB Compressed Power (dBm)30TechnologyGaAs MMICHigh Control Voltage (V)8Minimum Operating Temperature (°C)-40Maximum Operating Temperature (°C)105MountingSurface MountPackage Height1.3(Max)Package Width1.7(Max)Package Length3(Max)PCB changed6Standard Package NameSOTSupplier PackageSOT-26Pin Count6

Product Details:

• Electrochemical System: Lithium manganese dioxide
• Nominal Voltage: 3.0V
• Jacket: stainless steel
• High energy density
• Ideal for computers, calculators, cameras, heart rate monitor, alarm systems

Product Details:

TKC-GT1540 series current sensor is a open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents

Product Details:

Aluminium 100 µF Electrolytic Capacitors are essential electronic components designed for reliable energy storage and voltage smoothing in circuits. Featuring high capacitance and low equivalent series resistance (ESR), they efficiently stabilize power supply fluctuations and reduce noise. These capacitors are ideal for applications in power supplies, audio equipment, motor drives, and lighting systems. Constructed with high-quality aluminium foil and electrolyte, they offer durability, long lifespan, and excellent thermal stability. Compact and lightweight, they fit easily into various circuit designs. With precise capacitance tolerance, they ensure consistent performance, making them a trusted choice for engineers and electronics enthusiasts.

Product Details:

Product Details:

Ultrafast 35 Nanosecond Recovery Time • 175°C Operating Junction Temperature • Popular TO−220 Package • Epoxy Meets UL 94 V−0 @ 0.125 in • Low Forward Voltage • Low Leakage Current • High Temperature Glass Passivated Junction • Pb−Free Package is Available* 

Product Details:

TLP3555 P3555 Integrated Circuit IC DIP-4

◆Qty:10pcs


Digital temperature controllers are pivotal in maintaining precise temperature conditions across a variety of industrial processes. These devices are enhanced with several sophisticated features that differentiate them from more traditional systems. One of the most significant features is their programmable setpoints.

Product Details:

KBIC-120 DC Drives ChassisThe KBIC-120 is a 115 VAC rated 9 Amps RMS @ 45C. The control is designed for 90 VDC PM, Shunt and AC/DC motors. It will control motors between 1/100-1/2 HP (1.0 HP w/aux. Heat sink) by inserting the proper Plug-in Horsepower Resistor®. Speed range is 50:1 with load regulation of 1%. Features include Auto Inhibit®, Voltage Following, MOV transient protection, 5K speed pot and trimpot adjustments for Min, Max, Accel, IR and CL. Options include Auxiliary heat sink, AC Line and Armature Fuse Kit, Barrier Terminal Board, RFI/EMI filters and Signal Isolation (model SI-5). This control is available worldwide from stocking KB distributors. UL, CSA, CE. Patented.

Product Details:

• Two switching outputs, one of them with IO-Link communication interface
• Red/green display for clear identification of the acceptable range
• The process connection can be rotated for optimum alignment
• With long-term stability thanks to high overload protection
• Robust design for use in harsh industrial environments